Injectors disassembly set, mechanical 37 pieces

• Disassembling particularly heavily coked or rusted injectors


• The height of the support feet can be adjusted, so the bridge can be positioned exactly at a 90° angle to the injector, even when the support points are at different heights on the cylinder head


• Ideal for engines with 2 injectors that must be pulled simultaneously, since they are attached with only one double adjustable clamp, as in vehicles by Mercedes, Opel/Vauxhall, Fiat, etc.


• The injection nozzles can be partially dismantled using the 2 socket wrenches included in the set in order to attach the corresponding puller adapters from the set directly in the injector


• The required tensile force is applied mechanically using a spindle/pressure bearing and nut

Scope of delivery

• 1 x bridge, short, 360 mm


• 2 x crossbar


• 2 x feed shaft M18x1.5, length 220 mm


• 2 x connection adapter M18x1.5/M18x1.5


• 1 x pressure bearing


• 1 x pressure nut


• 3 x support foot/bridge connection element


• 4 x support foot, top


• 4 x support foot, midsection


• 4 x support foot, base


• 2 x crossbar/bridge connection element


• 2 x adapter M17x1/M27x1, Bosch


• 2 x adapter M14x1/M25x1, Siemens


• 2 x adapter M27x1, Siemens


• 1 x adapter M14x1.5, Piezo


• 1 x Allen key socket SW10 with bore, Bosch


• 1 x 4-PIN socket, Siemens


• 1 x thread compound