Fleece hook and loop Disc

Name: Fleece hook and loop Disc
Brand: ZEBRA
SKU: 0585472180

Fleece hook and loop fastener disc
SNDDISC-FLC-AG-A180-D125MM
ZEBRA

Art.-no. 0585472180

EAN 4050382293121

All versions

Specification

For matting, burnishing, polishing and for matching pre-sanded metal sheets. Achieving effective surfaces, cleaning oxide coatings and removing tempering colour.

Double impregnation

Extremely long service life compared with conventional hook-and-loop fleece discs.

Recommended rotation speed:

1000rpm to 4000rpm

Notice

At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one. Use tools with a low contact pressure; high contact pressure leads to premature wearing. With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.

Application

Application area

Materials to be processed: Forged steel, malleable iron, grey cast iron, carbon steel, deep drawing steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.

Technical information

Diameter (Ø)	125 mm
Design	Medium
Colour	Yellow
Adhesive system	Hook and loop
Grid size	P180

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (0)

Certificates/ Documents (0)

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Backing pad For hook-and-loop disc

ADHDISC-SNDDISC-M14-SOFT-D125

Art.-no. 0586641125

For optimal sanding results. The sanding plates are matched to the application.

x 1 pcs

Backing pad For hook-and-loop disc

ADHDISC-SNDDISC-M14-MED-D125

Art.-no. 0586642125

For optimal sanding results. The sanding plates are matched to the application.

x 1 pcs

Backing pad For hook-and-loop disc

ADHDISC-SNDDISC-M14-HARD-D125

Art.-no. 0586643125

For optimal sanding results. The sanding plates are matched to the application.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).