Edge clip With integrated metal clip
Edge clip
EDGCLIP-UNI-PA6.6-14X14MM
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
An alternative wherever drill holes are not an option and adhesives cannot be used due to high temperatures.
Easy to install without tools
- The edge clip is simply attached by hand onto the plastic or sheet metal edge
- The integrated spring steel metal clip is resistant to corrosion and ensures a secure hold on the edge
Flexible application due to installation in four directions:
- At a 90° angle or parallel to the edge
- On or next to the edge
For edges between 0.7 and 3.0 mm
E.g. in vehicle construction, car workshops and maintenance workshops
Longueur | 14 mm |
Largeur | 14 mm |
Matière | PA 6.6 - Polyamide |
Produktgewicht (per Stück) | 1.980 g |
Couleur | Black |
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Cable tie KBL 1 made of polyamide with plastic tongue
Hole Fixing For cable tie gun
KBL 1 self-adhesive base
Self-adhesive cable fastening cord clips
Blade receptacle Uninsulated
KBL 1 screw base
Heat-shrink crimp butt connector
Vehicle cable FLRY
Multi-point housing For flat plug-in sleeve 6.3 x 0.8 mm
Washer with large outside diameter DIN 9021 (with large outside diameter), A2 stainless steel, plain
Cable tie KBL 2 made of polyamide with plastic tongue, black
Cable spacers
Permanent marker set
Multi-point housing For blade connector 6.3 x 0.8 mm
Support clip type SRV
Blade connector Uninsulated
Flat washer For hexagon head bolts and nuts DIN 125, A2 stainless steel
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Waterproof pin housing TE Superseal 1.5 series
Single wire seal (SEAL) For uninsulated cable connector
Cable grommet, double-sided
Waterproof socket housing TE Superseal 1.5 Series
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A2 stainless steel, plain
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Flat connector MINI MIC SRS 1.5
Pipe and fastening clamp Multifix
Vehicle cable round cable (hose line) FLRYY
Hexagon nut DIN 934, A2 stainless steel, plain
Cover cap For hexagon head bolts/nuts
Cable tie KBL 1 made of polyamide with plastic tongue
Stud screw Zinc-plated steel
Cable tie KBL 2 made of polyamide with plastic tongue, black
TIPP® Smartlock GS pipe clamp
ELMO® connection terminal, screwless, Compact Plus
Wire end ferrule with plastic sleeve
Thin-walled heat-shrink hose Shrink rate 3:1, with internal adhesive
Insulated corrugated pipe
Fire protection foam Kombi
Pipe cable lug with inspection hole
Compression cable lug DIN 46235
Clip, metric
Aluminium clip
Cable and pipe spacer clip with longitudinal hole
Pipe spacer clip, aluminium
Line routing duct, LFK
End piece For LFK cable routing conduit
Spacer sleeve Hexagon, zinc-plated steel
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Flexible electrical conduit WBY-EL-F ComfortXQ® With high-glide inner coating
Rigid aluminium pipe Alu-Steck-WES
Sleeve connector For Alu-Steck-WES aluminium pipe
90° push-in elbow For Alu-Steck-WES aluminium pipe
Cable dispenser KAW 1
Cable dispenser XB500
Polyester coils, 5.3 mm, wound 3-way twisted with Powerglider
Cable feed device CPS 3
Cordless drill driver ABS 12 COMPACT M-CUBE
Insulation anchor SHARK® ISO
SHARK Pro plastic multi-purpose anchor