EPDM sealing tape with self-adhesive strip for outdoor use
SEALTPE-RAL-OUTS-EPDM-SA-0,6X300MMX20M
Art.-no. 0875350301
EAN 4048539004607
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
Watertight and breathable
- Provides a reliable seal against water from outdoors.
- Water vapour permeable membrane allows water vapour to permeate from inside to outside, thereby preventing moisture-related structural damage.
Extremely high elasticity
- Optimum safety in case of component movements.
- Convenient to apply due to tape flexibility.
Excellent resistance to weathering
- High-quality material ensures permanently secure sealing.
- Excellent UV resistance.
Further advantages
- Also suitable for slightly uneven substrates when combined with EPDM sealing tape adhesive.
- Good compatibility with bitumen.
- Tape cannot be plastered over.
- Not suitable for sealing in contact with the ground.
- Not suitable for sealing in accordance with DIN 18533.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For outdoor joints, e.g. window sills, floor-level windows, balcony doors, exterior door sills, conservatories and façades.
- Substrates must be load-bearing, dry and free of dust and grease.
- To install, cut the sealing tape to the desired length, apply the EPDM sealing tape adhesive to the substrate and smooth out with a joint knife, apply the tape to the substrate and press lightly with a press-on roller.
- Ensure that the tape is not installed under tension.
- The self-adhesive strip is intended to aid mounting on the frame/element and the tape must be secured with a mechanical fixing.
 | |
Colour | Black |
Adhesive base | Acrylate |
Chemical basis | Ethylene propylene diene natural rubber |
Width | 300 mm |
Thickness | 0.6 mm |
Length of roll | 20 m |
Design | With self-adhesive strips |
Min./max. temperature resistance | -30 to 75 °C |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Ultraviolet resistance | Yes |
Max. water-vapour diffusion resistance factor value µ | 5882 |
Elongation at break | 250 % |
Resistance against | Bitumen |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!