EPDM sealing tape adhesive

Name: EPDM sealing tape adhesive
Brand: Würth
SKU: 0893700153

EPDM sealing tape adhesive
SEALTPEADH-EPDM-300ML

Art.-no. 0893700153

EAN 4046777491296

All versions

Specification

Low-solvent special adhesive for reliable, long-term adhesive bonding of EPDM tapes

Excellent material compatibility

Low-solvent formula means it can be used on virtually all common building surfaces, e.g. also on Styrodur.

Highly elastic

When used with the elastic EPDM films, building movements are optimally compensated.

Good adhesive properties

Even adheres to slightly damp (but not wet) surfaces.

Excellent stability

Compound does not run off masonry.

Acid, isocyanate and silicone-free

Odourless

Notice

Store the original container tightly sealed in a dry place at temperatures between +5°C and +25°C without exposure to direct sunlight.

EPDM sealing tape adhesive, Flexband adhesive and Flexband adhesive Plus must not come into contact in wet conditions.

Do not use EPDM sealing tape adhesive on surfaces which have been pretreated with Butyl and Bitumen Primer (item no. 0982 875/876).

We recommend performing preliminary tests on bitumen strips due to the large number of different systems.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Application

Application area

For bonding Würth EPDM sealing tapes to window and door reveals and to other construction surfaces. Can also be used on uneven reveal surfaces.

Instructions

The application surfaces must be clean, dry and free of grease. For pre-treatment, refer to the technical data sheet.

Apply the EPDM sealing tape adhesive to the surface and wipe it off with a toothed spatula. Depending on the film width, the adhesive width should be a minimum of 40 mm on the building and a minimum of 30 mm on the element, with a thickness of 1 mm in each case. Pay attention to the planning specifications if a full-surface bond is required. With film overlaps, maintain an overlap length of at least 10 cm.

Glue the EPDM tape to the surface and press it on lightly using a press-on roller, while ensuring tension-free installation and the formation of a movement loop. After pressing on the film, the bonding gap should have a layer thickness of min. 1 mm and be completely filled with adhesive, without air pockets. The tape can be adjusted up to 30 minutes after bonding.

For more information, please refer to the technical data sheet.

Technical information

Contents	300 ml
Container	Cartridge
Chemical basis	Hybrid polyurethane
Colour	Black
Density	1.3 g/cm³
Full curing speed/conditions	2 mm/d / 23°C and 50% relative humidity
Min./max. processing temperature	5 to 35 °C
Min./max. temperature resistance	-30 to +70 °C
Silicone-free	Yes
Shelf life from production/conditions	12 Month / at 20°C

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (1)

Safety data sheet

Certificates/ Documents (5)

product declaration 1

product declaration 2

Manufacturer's declaration 1

Technical data sheet 1

Technical data sheet 2

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Tile adhesive spreader made of spring steel

ADHSPRDR-WOHNDL-E6-B200MM

Art.-no. 0695940947

x 1 pcs

Surface bonding agent Primer for Plastic/Wood/Stone

PRIM-BONDSEAL-PLA/WO/STN-250ML

Art.-no. 089010062

Optimisation of plastic, wood, stone and concrete surfaces

Press-on roller

WLPAPPRESROLL-F.SRAY-CONTACT-ADHESIVE

Art.-no. 0693011756

For pressing on large areas of material bonded with contact adhesive

x 1 pcs

Deep-penetrating primer

PRIM-DEEPSOLVENT-10LTR

Art.-no. 089054510

Solvent-free, transparent primer for surface hardening and regulation of absorbency.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).