EPDM 0.6 mm butyl sealing tape for outdoor use
SEALTPE-RAL-OUTS-EPDM-0,6X200MMX20M
Art.-no. 0875350200
EAN 4046778931739
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
Watertight and breathable
- Provides a reliable seal against water from outdoors.
- Water vapour permeable membrane allows water vapour to permeate from inside to outside, thereby preventing moisture-related structural damage.
Extremely high elasticity
- Optimum safety in case of component movements.
- Flexible tape for easy application.
Excellent resistance to weathering
- High-quality material ensures a permanently reliable seal.
- Excellent UV resistance.
Further advantages
- Secure installation even on slightly uneven substrates in combination with EPDM sealing tape adhesive.
- Good compatibility with bitumen.
- Not suitable for sealing in contact with the ground.
- Not suitable for sealing in accordance with DIN 18533.
- Tape cannot be plastered over.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Permanent, reliable sealing of joints outdoors, e.g. for window sills, conservatories and façades.
- Substrates must be load-bearing, dry and free of dust and grease.
- To install, cut the sealing tape to the desired length, apply the EPDM sealing tape adhesive to the substrate and smooth out with a joint knife, apply the tape to the substrate and press lightly with a press-on roller.
- Ensure that the tape is not installed under tension.
- The sealing tape with self-adhesive strips must also be secured to the frame/element with a mechanical fixing.
 | |
Colour | Black |
Backing material | EPDM |
Chemical basis | Ethylene propylene diene natural rubber |
Width | 200 mm |
Thickness | 0.6 mm |
Length of roll | 20 m |
Design | Without self-adhesive strips |
Min./max. processing temperature | 5 to 35 °C |
Min./max. temperature resistance | -40 to 120 °C |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Ultraviolet resistance | Yes |
Max. water-vapour diffusion resistance factor value µ | 5882 |
Elongation at break | 250 % |
Resistance against | Bitumen |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!