Drilling/cutting foam CUT+COOL
Prices for customers after login
Register now and access more than 125,000 products
Suitable for overhead work
Produces a highly-adherent oil foam on the workpiece
Requires no degreasing using cleaners
Wash off with clean water
Excellent cooling effect and strong adhesive force
Low consumption; can therefore be used as minimum quantity lubricant
Good performance thanks to high cutting speeds and low tool wear
Free from sulphur, mineral oil, heavy metals and resin as well as no volatile hydrocarbons. Free from substances that impair wetting of paint.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Ideally suited for all machining work such as thread cutting, thread drilling, centring, broaching, reaming, drilling and milling.
Glycol and polyglycol ether, additives
Shelf life from production