Drift punch According to DIN 6458
Drift punch
DRFTPNCH-4-L120MM
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Chrome vanadium air hardening steel
Tempered safety impact heads
Prevents impact head from deforming or fracturing
Full length of shaft hardened
Particularly tough and wear resistant
Tempered impact head
2 versions available
- B = Lightweight version
- D = Heavy-duty version
 | |
Length | 120 mm |
Striking-surface diameter (a) | 12 mm |
Width of tip (d) | 4 mm |
Design | D |
Datasheets (0)
Certificates/ Documents (0)
Pin punch In accordance with DIN 6450 form C with hardened impact head
Pin punch set 6 pieces
Drift punch in accordance with DIN 6458 6 pieces
Pin punch With 2-component plastic handle
Centre punch In accordance with DIN 7250 with hardened impact head
Flat chisel In line with DIN 6453
Pin punch assortment 5 pieces
Ejector drift set 8 pieces
Metric combination wrench with POWERDRIV®
Push-through ratchet 1/2"
Pin punch set, large dimensions 5 pieces
Combination pliers DIN ISO 5746
T-handle screwdriver set TX For TX socket, with side tip, 6 pieces
Pincers DIN 5241, German design
Pin punch
Machinist's hammer German design in accordance with DIN 1041
Wire brush With wooden body
File handle
High Power battery
Side cutters DIN ISO 5749
1/4 inch socket wrench insert, metric short
1/2 inch socket wrench insert metric, hexagon, short
C 6.3 bit assortment (1/4 inch) with belt clip 17 pieces
Screwdriver for hexagon drive
Slotted screwdriver with round shank
Flat blunt-ended file DIN 7261, shape A
Screwdriver slotted slim With round shank
Slotted screwdriver with hexagon shank
Metric double open-end wrench DIN 3110/ISO 1085
Water pump pliers DIN ISO 8976
