Digital calliper DC1
Digital calliper DC1
CAL-DGT-DC1-(0-150MM)
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
- Long service life and reliable measurements due to reinforced plastic housing, hardened and ground measuring jaw
- Very easy-to-read display, even from wider viewing angles
- Two-button operation, on/off, zero/switching inch/mm
- Flat depth gauge for precise depth measurements
- Easy transfer of measurement results using the locking screw on the top to lock
- Tool-free battery replacement, including R2032 battery
- Automatic shutdown after 20 minutes
- Thread table on the rear of the housing
- Supplied with factory calibration certificate
- Keep the callipers clean and dry. Fluid can damage the slide
- Surfaces should be carefully cleaned with cotton fabric
- Never use petrol, acetone or other organic solvents
- Never apply voltage to parts of the digital callipers (e.g. engraving with an electric pin) as this may damage the circuit
Datasheets(X)
Clean and dry the digital calliper and objects to be measured.
Absolute length measuring accuracy | 0.02 mm |
Max. length measuring range | 150 mm |
Length of jaw | 40 mm |
Length of measuring tip | 24 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!