Centre punch In accordance with DIN 7250 with hardened impact head
Centre punch DIN 7250
CENTPNCH-MAN-L150MM
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
 | |
Length (L) | 150 mm |
Striking-surface diameter (a) | 12 mm |
Width of tip (d) | 5 mm |
Datasheets (0)
Certificates/ Documents (0)
Scriber
Flat chisel In line with DIN 6453
Centre punch With 2-component plastic handle
Automatic centre punch
Pin punch set 6 pieces
Pin punch In accordance with DIN 6450 form C with hardened impact head
Scriber With coded steel handle and screwed in straight and curved steel needle
Drift punch According to DIN 6458
Machinist's hammer German design in accordance with DIN 1041
Flat hand engineer's file set 5 pieces
Machinists' hammer with protective handle sheath
Machinist's hammer with plastic handle
Ejector drift set 8 pieces
Hand brush
Steel square With stop
Metric combination wrench with POWERDRIV®
Water pump pliers DIN ISO 8976
Wire brush With wooden body
Spirit level made of light metal
Combination wrench assortment, short type
Double open-end wrench assortment
1/2 inch socket wrench insert metric, hexagon, short
Flat washer For hexagon head bolts and nuts
Adjustable open-end wrench
Painters' spatula Made of flexible, high-quality steel (taper ground)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Elbow pipe wrench S-jaw, Swedish form
1C cutter knife with slider
2C cutter knife with slider
1/2 inch socket wrench insert, metric
