Welcome to Würth Germany For trade customers only Contact +49 7940 15-2400
CUT+COOL drilling and cutting oil - CUTOIL-DRILL-(CUT-COOL)-CANISTER-5LTR CUT+COOL drilling and cutting oil - CUTOIL-DRILL-(CUT-COOL)-CANISTER-5LTR
CUT+COOL drilling and cutting oil - CUTOIL-DRILL-(CUT-COOL)-CANISTER-5LTR - 1
CUT+COOL drilling and cutting oil - CUTOIL-DRILL-(CUT-COOL)-CANISTER-5LTR - 2

CUT+COOL drilling and cutting oil

Drilling/cutting oil CUT+COOL
CUTOIL-DRILL-(CUT-COOL)-CANISTER-5LTR

Art.-no. 08930501
EAN 4011231892858
All versions

-,--
price per selected packing unit | Individual prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

Report incorrect product information here

Multi cutting oil for light to medium machining work

Universal application



Cools even while spraying


  • Protects tools

  • Prevents welding of small material particles on the cutting edge


Good creep properties, penetrates even the smallest tolerances



Excellent corrosion protection


  • Provides lasting protection against further rust and corrosion

  • No post-treatment or preservation required


Free of silicone, chlorine, resins, and acids

Notice

Free from substances that impair wetting of paint.

Application area

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Multi-purpose cutting oil for light to medium machining.

Instructions

Spray the workpiece from about 20–30 cm.


The product is used as supplied.

Contents

5 l

Container

Canister

Colour

Reddish

Smell/fragrance

Perfumed

Chemical basis

Mineral oil

Shelf life from production

18 Month

Density

0.889 g/cm³

Density conditions

0 - not applicable

Acid-free

Yes

Chlorine-free

Yes

Free from heavy metals

Yes

Min. flashing point

190 °C

Silicone-free

Yes

Resin-free

Yes

Kinematic oil basis viscosity

12 mm²/s

Drilling and cutting oil Drilling and cutting oil Perfect Drilling and cutting paste Perfect Drilling and cutting oil Eco Drilling and cutting foam Cutting oil DVGW Cooling lubricant Ultra Cooling lubricant Ultra HD
Materials
Steel, alloyed steel xx xxx xxx xxx xxx xx xx xxx
High-alloy steel xx xxx xxx xxx xxx xx xx xxx
Cast iron, grey cast iron xx xxx xxx xx xxx x xx xxx
Tungsten carbide xx xxx xxx xx xxx x x xx
Non-ferrous base metal (copper, brass etc.) xx xxx xx xxx xxx x x xx
Titanium x xxx xxx xx xxx x x xx
Magnesium x xxx xxx xx xxx x x xx
Aluminium, aluminium alloys x xxx xxx xx xxx x xx xxx
Machining processes
Lathing, automatic lathes xx xxx x x x x xx xxx
Drilling, countersinking, reaming xx xxx xxx xxx xxx x xx xx
Deep drilling x xxx xxx xx xx x x xx
Sawing xx xxx xx xxx xxx x xx xx
Thread cutting xx xxx xxx xxx xxx xx xx xx
Thread forming, rolling xx xxx xxx xxx xxx x x xx
Milling x xxx x xx xx x xxx
Sanding x xxx x x x x xxx xx
Forming, rolling, bending x xxx xx xx xx x x xx
Punching, fine punching x xx xx xx x x x
Broaching, toothing x xxx xx xxx xxx x x x
Features
Basis Mineral oil Mineral oil with synth. ester Mineral oil with synth. ester Synth. ester Glycol and ester Ester Mineral oil Mineral oil
Viscosity (mm²/s) 12 25 Paste-like 35 n/a 5 66 76
Minimum quantity lubrication ⎷ ⎷
Free from mandatory warning symbols ⎷ ⎷ ⎷ ⎷
Can be used overhead ⎷ ⎷
DVGW-approved ⎷
Biodegradable/approved for use with food ⎷
Extremely high lubricating performance ⎷ ⎷ ⎷ ⎷ ⎷
Extremely long tool life ⎷ ⎷ ⎷ ⎷ ⎷ ⎷
Minimal smoking ⎷ ⎷ ⎷ ⎷ ⎷ ⎷
Extremely low consumption ⎷ ⎷ ⎷ ⎷
Good creeping properties ⎷
Free of boric acid ⎷ ⎷ ⎷ ⎷
Low-foaming ⎷ ⎷
Extremely high microbial stability ⎷ ⎷
Water hazard class 1 1 1 1 2 1 1 1
Formaldehyde-free ⎷ ⎷ ⎷ ⎷
Extremely gentle on the skin (amine-free) ⎷ ⎷ ⎷
xxx excellent suitability
xx good suitability
x less favourable suitability
⎷ applicable
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Tap DN 45 thread for 5 l and 10 l plastic canisters
Tap DN 45 thread for 5 l and 10 l plastic canisters

TAP-(F.PLACANI-5LTR)

The tap makes it quick and easy to cleanly fill up and dispense liquids and helps with dosing large amounts of liquid in a short period of time.
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Filling system REFILLO<SUP>®</SUP>
Filling system REFILLO®

CACANI-REFILLO-AMPTY-DRILL/CUTTINGOIL

REFILLO
The safe and economical system for manual refilling of spray cans with active substances and compressed air.
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Compressed-air filling station Refillo<SUP>®</SUP> combi
Compressed-air filling station Refillo® combi

FILSTA-COMPRESSED AIR CANS-COMBI

REFILLO
For quick and easy pressurised filling of REFILLO & REFILLOmat cans
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details