Brake calliper impact wrench, 3/4-inch FOR COMMERCIAL VEHICLES, MB/DAF
Brake calliper impact wrench 3/4 inch 12 point
M26-12P-BOX-END-BRAKE-CAL.-WREN.-3/4IN
Art.-no.
1952006775
EAN 4056807557250
-,--
price per selected packing unit | Individual prices for customers after login
price per selected packing unit | Individual prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7940 15-2400.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Allows removal and mounting of brake calliper fastening screws when working on brake system.
- Primarily for use on front and trailing axles of commercial vehicles
- Even the most stubborn fittings can be loosened with a hammer blow to the wrench end.
- Wrench is equipped with a 3/4-inch square drive, enabling tightening in accordance with manufacturer's specifications in combination with a torque wrench.
- Removing the tie rod lever is no longer required.
Notice
Observe laser-engraved torque conversion formula (required as lever extension depends on design).
Product information
Datasheets(X)
Product weight (per item) | 565 g |