Adhesive sealing tape EURASOL®

Adhesive sealing tape EURASOL

Art.-no. 0992700050

Prices for customers after login

Adhesive sealing tape EURASOL®

Art.-no. 0992700050

Prices for customers after login



Show availability in Würth trade store

Exclusively for trade customers

Register now and access more than 125,000 products

Extremely adhesive and versatile adhesive tape for airtight and windproof bonding

Tested resistance to ageing

  • Maximum reliability for blower door tests

  • Protects against moisture and mould formation in insulation

Excellent initial and final adhesion

Fast, simple and safe application

Flexible backing material

Easily adapts to penetrations



The application surface must be dry and free from grease, chips and dust. Ensure that no standing water can build up in bonded areas.

  • Certified for thermal ageing resistance and moisture resistance by the University of Kassel

  • Proof of airtight seal from the Fraunhofer Institute for Building Physics in Stuttgart based on DIN 18055/DIN EN 42 and DIN V 4108-7/prEN 12114

  • ENeV

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the wide range of applications and of storage and usage conditions, we cannot guarantee a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Suitable for indoor and outdoor use (UV resistance: 3 months)

  • Permanent bonding of roof protection films, vapour barriers and vapour retarders

  • Bonding of overlapping sections of these films and connections and openings, e.g. on wood (≤ 20% wood moisture content), metal, hard plastic

  • Airtight joint adhesion of OSB boards

EURASOL is ideal for bonding PP-based Wütop vapour retarders, Wütop vapour barriers and Wütop roof protection films, and has been tested on these films. For this reason, we recommend using these Wütop films to achieve optimum results with the Würth air seal system.


Affix Eurasol to the overlap seam by removing just a few centimetres of the masking paper. On removing the masking paper, the adhesive tape is glued over the full length of the overlapping seam by pressing on it. Please ensure sufficient contact pressure. After adhesion, cut the adhesive tape with a knife. Do not subject adhered tape to long-term tension.

Backing material

PE film with mesh

Adhesive base

Acrylate dispersion


White (base material)


60 mm


25 m

Min./max. processing temperature

0 to 50 °C

Min./max. temperature resistance

-40 to 100 °C

Ultraviolet resistance

3 months



Shelf life from production/conditions

99 Monate / in geschlossener Verpackung bei Normalklima

Number of rolls per pallet with packs of 6

306 PCS

Number of rolls per pallet with packs of 22

440 PCS

Additive article:

Vapour retarder WÜTOP® DB 2


Vapour-permeable, moisture-regulating, airtight and easy-to-install vapour retarder for interior renovations and attic conversions. To be used in conjunction with vapour-permeable underlay membranes and roof protection films
x 75 m2
WÜTOP® DS 100 vapour barrier


WÜTOP DS 100 is a vapour and wind barrier with high sd value
x 75 m2
Underlay membrane and roof protection film WÜTOP® Trio


All-round roof protection film
x 75 m2
Underlay/roof protection film WÜTOP® 95


Lightweight, pale, vapour-permeable underlay membrane and roof protection film for pitched roofs
x 75 m2
Underlay membrane and roof protection film 2SK


All-round roof protection film
x 75 m2
Moisture-variable vapour retarder WÜTOP® Thermo Vario SD


Moisture-variable vapour retarder with the advantages of polyester technology
x 75 m2
Moisture-variable vapour retarder WÜTOP® Vario SD


x 75 m2

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:

Information on price and image display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units


The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
Art.-no. ! common.detail.customermaterialnumber !

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 

Flip catalog


Datasheets ()

CAD Data  | 




Technical information