Adhesive lubricant pre-cleaner HHS® Clean

Adhesive lubricant, pre-cleaner, HHS Clean

Art.-no. 089310610

Prices for customers after login

Adhesive lubricant pre-cleaner HHS® Clean

Art.-no. 089310610

Prices for customers after login



Show availability in Würth trade store

Exclusively for trade customers

Register now and access more than 125,000 products

Highly effective pre-cleaner + adhesion promoter (primer function) specifically matched to HHS products

Good cleaning performance

  • Quick and effective

  • Easily removes the most stubborn soiling

Primer function

  • Improves adhesion of lubricant

  • Extends lubrication intervals

  • Saves time and money

Short flash-off time

  • Short downtimes for treated parts

  • No second application required

Good material compatibility with various surfaces

  • Extremely wide application range

  • Seals do not swell

Spray head with direct jet

Targeted and precise cleaning of dirty parts

Acetone-free, AOX-free and silicone-free

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

For pre-treating heavily soiled lubricating points such as coarse and soiled grease, oil residues, resin, wax and much more.


Spray specific areas of soiling with HHS Clean; doing so means that no after-treatment is required as the soiling has already been removed.

Suitable glove:

Nitrile chemical protective glove
Nitrile chemical protective glove
Permeation level: 5
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
≥ 10 min
≥ 30 min
≥ 60 min
≥ 120 min
≥ 240 min
≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.
Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 

Flip catalog


Datasheets ()

CAD Data  | 




Technical information