Compressed air cleaning gun TOP Gun

Cleaning gun, TOP gun
CLNGUN-(TOP GUN)

Art.-no. 0891703140

Prices for customers after login

Compressed air cleaning gun TOP Gun

Art.-no. 0891703140

Prices for customers after login

Quantity

PU

x1 pcs

In : currently piece / pieces available

Show availability in Würth branch offices

Exclusively for trade customers

Register now and access more than 125,000 products

Professional cleaning gun for cleaning surfaces on the vehicle.

Thorough and effective cleaning


  • Micro-atomisation results in effective use of cleaning agent

  • Air and cleaning agent feed can be set manually


Safe, reliable and hassle-free


  • Ball-bearing-mounted drive creates a cyclone effect

  • Low wear and maintenance


Flexible handling


Ideal for hard-to-reach places thanks to jointed connection

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Suited to cleaning upholstery and carpets, interior door panels, door sills, cockpits and rims.


Easily removes stains, yellowing caused by nicotine, footprints, road salt rims, dog hair and other dirt from vehicle interiors and exteriors.

Instructions

Pre-clean the surface to be cleaned using a vacuum cleaner or a brush.


Then fill the TOP Gun container with the relevant cleaner to the recommended mixing ratio and connect the TOP Gun to the pneumatic air (optimum feed: 8 bar). Change the ball valve to the vertical position (ON) and slowly and evenly clean the material, working in a circular motion. To dry, change the ball valve back to the vertical position (OFF), in which only air continues to flow from the cleaning gun. If the material is still damp, this can be removed using a cloth.

Min./max. working pressure

6-9 bar

Product weight (per item)

954 g

Max. flow rate

160 l/min